Listen to Texas Radio Shortwave

← Back to the home page

Listen to Texas Radio Shortwave from Anywhere in the World

Texas Radio Shortwave broadcasts via Shortwave Radio Gold and Channel 292 in Germany. We know reception can sometimes be difficult, even within Europe—but don’t worry, there’s an easy solution.

Use a free remote receiver.

If your own radio can’t quite pick us up, tune in through one of these online software-defined radio (SDR) receivers:

  • Weston-super-Mare, UK – Our personal favorite. The owner welcomes TRSW listeners to his KiwiSDR.
    http://sdr.loginto.me:8073/
  • University of Twente, Netherlands – A reliable and popular choice that our schedule’s linked to. It is a WebSDR, not a KiwiSDR, so its opening screen and settings look different from the ones shown below.
    http://websdr.ewi.utwente.nl:8901/
  • North American listeners can often hear our late-night (UTC) Channel 292 broadcast on 9670 kHz using a KiwiSDR in rural Maryland, USA, hosted by N5RTC.
    http://sdr.hfunderground.com:8076/

How to Listen to a KiwiSDR

A KiwiSDR is shared with other listeners, so the settings you see when the page opens may be left over from someone else. Check these first.

  1. If a message says the receiver is busy, refresh the screen to try again or try later.
  2. When the page opens, the screen is dimmed. Click the large play button in the middle of the screen, under the words “Click to start KiwiSDR.” Nothing will work until you do.

The play button on the receiver's dimmed first screen, with a red number 2 beside it and the words Click to start KiwiSDR below

  1. Click the frequency box, type the frequency from our schedule, and press Enter.
  2. Look at the mode buttons below the frequency box. Click AM, so that the AM button is lit green.
  3. Click the green speaker icon at the top right if you hear nothing. A speaker with sound waves means the sound is on.
  4. Look at the row of colored tabs below the mode buttons. Make sure the Audio tab, the blue one, is selected. The sound controls open underneath.

The receiver's tuning controls with red numbers 3 to 6 pointing to the frequency box, the AM button, the speaker icon and the Audio tab

  1. If a nearby station is spoiling your reception, click AM again so that the button changes to AMN. AMN is narrow AM, which blocks more of the interfering signals.

The same controls with the mode button now reading AMN, marked with a red number 7

Reception reports welcome!

Whether you listen on your own radio or through a remote SDR, we’re happy to verify your reports.

↑ Back to top